Thursday, December 10, 2009

DMS Automotive ECU program for Maserati 4200GT

We received this ECU from Miracolare in Yokohama, Japan. This ECU belongs to a black 4200GT with the F1 transmission, power increases up to 425bhp and also making the F1 shifts smoother.


Thursday, November 12, 2009

Miracolare Japan tests DMS tuned Gallardo on FISCO track




Mr. Noritaka Noda; owner of Miracolare Corporation Japan, took out his DMS tuned 2004 MT Lamborghini Gallardo and had arranged an interview and test at the FISCO Suzuka Circuit with one of Japans top supercar magazines ROSSO. We will post up the article once it comes out to
print.

An in car video was also recorded showing a top speed of 290km/h on the straight which is about 20-30km/h quicker than what the standard car normally does on the same track. http://www.youtube.com/watch?v=G6MaRMvvJGg

Miracolare will be the official distributor for DMS Automotive in Japan and we look forward to having a long lasting business relationship with them.

Tuesday, September 29, 2009

DYMAG 18" set for BMW 3-series E46



This is a set that just came in for a unique client, 3-series BMW that will be stripped down and used to race on track, stock wheels are 18" and the client wanted the Dymags in the exact size to reduce as much unsprung weight as possible.

Tuesday, September 8, 2009

DMS Automotive ECU Program for LP640 707BHP


Here is a dyno sheet we received from DMS of their ECU program for the LP640, massive 71bhp increase by just modifying the ECU.

Monday, September 7, 2009

onlyMercedes article on DMS tuned C63 AMG

Our client in Osaka, Japan sent us a scan of an article written on his C63 by onlyMercedes magazine which is the premier Mercedes enthusiasts magazine in Japan.

Monday, August 24, 2009

C63 in Osaka



One of our customers in Japan sent us this photo of his car, apart from the DMS ECU program the owner also has installed an x-pipe and a very nice carbon lip from Vath.

Tuesday, August 4, 2009

DMS Automotive 599GTB




Here is another 599GTB we did, note there are two ECU's on every current model Ferrari, one to control each side of the engine.

Tramontana R equipped with 20" Dymag carbon wheels

The £385,000 Tramontana R features a 5.5 Liter twin turbo V12 Mercedes engine which pumps out a massive 760bhp and 1,100Nm of torque, giving the Tramontana R a 0-60mph time of 3.6 seconds. This new R version is fitted with 20" Dymag 9-spoke carbon rims using 245/40/20 and 335/30/20 tires, the size of this car is a bit deceiving but it's actually quite large at 4,900mm long and 2,080mm wide making it bigger than a Pagani Zonda F.

Monday, August 3, 2009

Sunday, August 2, 2009

DMS Automotive ECU program Lamborghini LP560-4


This is a dyno sheet of an LP560 with before and after plots using the Dyno Dynamics all wheel drive dyno, its important to remember that Dyno Dynamics makes the most accurate Dyno as it is a "loading dynamometer" which measures torque and then makes a calculation for power based on that torque figure.

Saturday, August 1, 2009

DMS - ECU program for 599GTB and QP


While we were in Indonesia, we tuned this beautiful 599GTB and brought power from its already fast stock rating of 611hp to 647hp, the throttle response is so much better and in race mode its an entirely different car.

We also worked on the grey Quattroporte next to it bringing power from 400hp to 438hp, which is even more than the new Quattroporte S.

EVO magazine reviews the DMS tuned 997TT

EVO magazine reviews the DMS tuned 997TT stage II which consists of an upgraded ECU, modified turbo's, manifolds and an exhaust. All of these modifications brings the 997TT's power up to 605hp and 597lb/ft torque.

Here is the link
http://www.evo.co.uk/carreviews/evocarreviews/225093/dms_997_turbo.html

DMS Automotive ECU program for C63


We just tuned this C63 ECU which was sent to us from Japan, the program will increase power to 530hp and 486 lb/ft torque, DMS also used the throttle map from the CLK 63 Black Series. We plan on having some performance tests done soon and will post the figures when we get the information from the owner.

Nissan GT-R with Dymag 20" carbon fiber wheels


This is the first set of Dymag's Carbon Fiber wheels that were installed in Hong Kong, the wheels are 20x9.5 and 20x11 using stock offsets. The stock wheels are already quite light but the Dymags are 3kg lighter per wheel!