C63 in Osaka

One of our customers in Japan sent us this photo of his car, apart from the DMS ECU program the owner also has installed an x-pipe and a very nice carbon lip from Vath.

DMS Automotive 599GTB

Here is another 599GTB we did, note there are two ECU's on every current model Ferrari, one to control each side of the engine.

Tramontana R equipped with 20" Dymag carbon wheels

The £385,000 Tramontana R features a 5.5 Liter twin turbo V12 Mercedes engine which pumps out a massive 760bhp and 1,100Nm of torque, giving the Tramontana R a 0-60mph time of 3.6 seconds. This new R version is fitted with 20" Dymag 9-spoke carbon rims using 245/40/20 and 335/30/20 tires, the size of this car is a bit deceiving but it's actually quite large at 4,900mm long and 2,080mm wide making it bigger than a Pagani Zonda F.

DMS Automotive E92 M3 reviewed by BMWCAR

BMWCAR magazines reviews the DMS tuned E92 BMW M3

DMS Automotive ECU program Lamborghini LP560-4

This is a dyno sheet of an LP560 with before and after plots using the Dyno Dynamics all wheel drive dyno, its important to remember that Dyno Dynamics makes the most accurate Dyno as it is a "loading dynamometer" which measures torque and then makes a calculation for power based on that torque figure.

DMS - ECU program for 599GTB and QP

While we were in Indonesia, we tuned this beautiful 599GTB and brought power from its already fast stock rating of 611hp to 647hp, the throttle response is so much better and in race mode its an entirely different car.

We also worked on the grey Quattroporte next to it bringing power from 400hp to 438hp, which is even more than the new Quattroporte S.

EVO magazine reviews the DMS tuned 997TT

EVO magazine reviews the DMS tuned 997TT stage II which consists of an upgraded ECU, modified turbo's, manifolds and an exhaust. All of these modifications brings the 997TT's power up to 605hp and 597lb/ft torque.

Here is the link
http://www.evo.co.uk/carreviews/evocarreviews/225093/dms_997_turbo.html

DMS Automotive ECU program for C63

We just tuned this C63 ECU which was sent to us from Japan, the program will increase power to 530hp and 486 lb/ft torque, DMS also used the throttle map from the CLK 63 Black Series. We plan on having some performance tests done soon and will post the figures when we get the information from the owner.

Nissan GT-R with Dymag 20" carbon fiber wheels

This is the first set of Dymag's Carbon Fiber wheels that were installed in Hong Kong, the wheels are 20x9.5 and 20x11 using stock offsets. The stock wheels are already quite light but the Dymags are 3kg lighter per wheel!